Eternal Rollerz C.C. - Aircraft Gauges & Switch Panels

Aircraft Gauges & Switch Panels

A really neat way to install your aircraft hydraulic setup is with pressure gauges from a warbird. The type we like to use have no sending unit. Pressure is ran directly into these gauges. These gauges are rated for 2000PSI but that is fine on a aircraft setup because most put out between 1000-1400PSI. We have updated this page now that we have mounted the gauges in a nice switch panel for our aircraft setup.

We like to use push button switches for our aircraft setups. Push buttons give the vehicle a authentic touch with the aircraft hydraulics.

Above: Here are three warbird hydraulic pressure gauges.

Above: A close up of a pressure gauge face.

Above: Here is the back of the unit where pressure is ran directly into the gauge.

Above: Here is another view of the gauges.

Above: Here is a old school switch panel we had made for a two pump front / back aircraft setup. Thank you Bernie.

Above: Switches are installed in the panel. This setup uses push button switches. The two gauges are also installed.

Above: The panel was wired by Jay. After wiring many modern switch boxes Jay quickly finishes this wiring job.

Above: Here is the panel.

Above: Here is another view of the panel.

Above: Old school all the way.

Above: Working the switches of a aircraft setup is different than modern setups.

Above: Here are some more gauges waiting to be installed in aircraft hydraulic switch panels.

More Information & Resources

Service, Repair & Custom Work:

Aircraft Parts Sales:

More Educational Information:

BACK